home *** CD-ROM | disk | FTP | other *** search
/ ShareWare OnLine 2 / ShareWare OnLine Volume 2 (CMS Software)(1993).iso / network / blts493.zip / MSDOS6.TXT < prev    next >
Text File  |  1993-04-13  |  7KB  |  119 lines

  1. LANtastic Network Operating System Compatibility Bulletin
  2.  
  3. Product Reviewed: Microsoft DOS version 6.0
  4. Classification:  Operating Systems
  5. Date:  3/31/93
  6. Engineer:  JAG
  7. -------------------------------------------------------------------------------        
  8.  
  9. Compatibility Statement:
  10. MS-DOS version 6.0 is compatible with LANtastic versions 4.xx and 5.xx.
  11.  
  12. Product Overview:
  13. MS-DOS 6.0, the newest revision of Microsoft's DOS operating system, includes 
  14. many new features and enhancements.  In general, those features may be used 
  15. with LANtastic, see the Compatibility Notes section below for any limitations.
  16.  
  17. Product Installation Notes:
  18. The LANtastic SERVER.EXE  program should not be running at the time that 
  19. you run the MS-DOS 6 SETUP program to install MS-DOS.  If it is, you will 
  20. receive the error: "Setup cannot identify your hard disk's startup partition, 
  21. and therefore cannot install MS-DOS on your hard disk.  Press ENTER to exit 
  22. Setup, and then contact your computer vendor for assistance."  If you see this 
  23. message, you must remove the SERVER program from memory by either rebooting or 
  24. using the '/REMOVE' option of the SERVER command.  Microsoft also instructs 
  25. you to remove any disk caching programs, delete-protection utilities, or Anti-
  26. virus programs.  Therefore, if you are using the LANtastic LANCache disk-
  27. caching utility, you must also remove it from memory before running SETUP.  
  28. See your LANtastic manuals for more information on removing SERVER and 
  29. LANCache from memory; see the MS-DOS 6 User's Guide for further 
  30. instructions on preparing your computer for MS-DOS 6 installation.  Additional 
  31. information about setting up MS-DOS 6 with LANtastic is available in the 
  32. NETWORKS.TXT file that ships with the MS-DOS upgrade.
  33.  
  34. Product Execution Notes:
  35. MS-DOS 6 includes a revised EMM386.EXE that can make more upper memory 
  36. blocks (UMBs) available for loading drivers and terminate-stay-resident 
  37. programs (TSRs), freeing more conventional memory for DOS programs.  You 
  38. can use DOS's LOADHI command to load any LANtastic TSRs into UMBs.  
  39. When you configure UMBs on a PC that is using an Artisoft Enhanced 2Mbps 
  40. adapter, an SMC/WD 8003 series adapter, or another manufacturer's adapter 
  41. that uses an upper memory address, make sure to use EMM386's '/X' switch to 
  42. exclude the adapter's memory from being used by EMM386.  See the MS-DOS 6 
  43. Resource Kit for more information on EMM386.EXE switches.
  44.  
  45. A new feature in MS-DOS 6 that is designed for use with EMM386.EXE is 
  46. MemMaker, a memory optimization utility.  MemMaker can be used to find the 
  47. optimum configuration for your computer's drivers and TSRs, maximizing the 
  48. amount of conventional memory available to programs.  You can use MemMaker 
  49. to optimize memory for PCs running LANtastic, with one precaution:  MemMaker 
  50. has to reboot your machine in order to determine the best configuration.  
  51. Therefore, on PCs that are LANtastic servers (e.g. PCs running the SERVER 
  52. command in the STARTNET.BAT or AUTOEXEC.BAT file), be sure that no users 
  53. are logged in at the time you run MemMaker.  Otherwise, files that those users 
  54. have opened may be damaged by the reboot.
  55.  
  56. Another new feature is DoubleSpace, a powerful new disk compression utility 
  57. that is integrated into MS-DOS 6.  DoubleSpaced drives can be used on a 
  58. LANtastic workstation or server, but you cannot do the initial setup of 
  59. DoubleSpace while the LANtastic SERVER or LANCache programs are loaded.  
  60. For best results, reboot your computer and bring it up without any LANtastic 
  61. TSRs loaded before setting up DoubleSpace drives.  Once DoubleSpace is set 
  62. up, you may re-load the LAN software and use it normally.  In addition, 
  63. LANCache version 3.0, which ships with LANtastic v5.0, may be used to cache 
  64. DoubleSpaced drives.  See the MS-DOS 6 NETWORKS.TXT file for more 
  65. information about using DoubleSpace and LANtastic together.
  66.  
  67. MS-DOS 6 includes a completely new BACKUP utility which is also compatible 
  68. with LANtastic.  You can use it to back up your local or network drives to 
  69. diskettes, another local drive, or another network drive.
  70.  
  71. Compatibility Notes:
  72. NOTE:  See the MS-DOS 6 NETWORKS.TXT file for more information on some 
  73. of the following topics.
  74.  
  75. 1) Once DoubleSpace has been set up, the host drive(s) and the compressed 
  76. drive(s) do not show up correctly in the 'Disk Drives and Printers' section of 
  77. the LANtastic NET program.  A DoubleSpaced C: drive will be displayed in NET as 
  78. "physical" rather than compressed, and host drives and other drives that should 
  79. be "Available for DoubleSpace" do not appear on NET's drive list at all.  This 
  80. limitation does not affect the functionality of DoubleSpace or NET and you can 
  81. still redirect drives and printers normally.
  82.  
  83. 2) The UNDELETE utility, for both DOS and Windows, will only function in the 
  84. "Delete Sentry" mode if a PC is running the LANtastic SERVER program.  It may 
  85. be used in any of its modes if the PC is set up as a workstation only (running 
  86. the REDIR program, but not SERVER).  If you want to track deletions on network 
  87. drives from any PC running LANtastic, you must use UNDELETE in Delete Sentry 
  88. mode.
  89.  
  90. 3) The MS-DOS 6 UNFORMAT command cannot be used on a hard disk if 
  91. SERVER is loaded.   It may be used on floppy disk drives if the "Floppy Direct" 
  92. parameter is set to "Enabled" in the NET_MGR "Server Startup Parameters."
  93.  
  94. 4) The new MS-DOS DEFRAG disk defragmenting command may not be used 
  95. when SERVER is running.  To run DEFRAG, remove server from memory or 
  96. reboot the PC without loading the LAN software.  LANCache should also be 
  97. removed from memory or disabled when you run DEFRAG.
  98.  
  99. 5) The SMARTDRV disk caching utility may be used with LANtastic, but do not 
  100. run LANCache and SMARTDRV at the same time.  
  101.  
  102. 6) Microsoft's new Anti-Virus utility MSAV cannot be used to scan for virii if 
  103. the LANtastic SERVER program is loaded.  Remove server from memory or reboot 
  104. your PC without loading SERVER in order for MSAV to run correctly.
  105.  
  106.  
  107. Vendor Information:
  108. Microsoft, Inc.
  109. One Microsoft Way
  110. Redmond, WA 98052-6399 
  111. Phone: 206/882-8080
  112.  
  113. -------------------------------------------------------------------------------
  114. ARTISOFT, Inc. makes no warranties as to the completeness or accuracy of this 
  115. document.  LANtastic is a trademark of ARTISOFT, Inc.  Brand names, company 
  116. names, and product names are trademarks or registered trademarks of their 
  117. respective companies.
  118. _______________________________________________________________________________
  119.